Leakage Mitigation and Internal Delay Compensation in FMCW Radar for Small Drone Detection
Not on the map. Why?
Abstract (arXiv)
One of the notorious problems of frequency modulated continuous-wave (FMCW) radar is leakage between the transmitter and the receiver. The phase noise of the leakage is expressed as a skirt around the leakage signal on power spectrum. It causes the deterioration of the dynamic range, especially, in the near-distance region. Therefore, although FMCW radar has an advantage over pulse radar in terms of near-distance target detection due to its way of operation, the advantage of FMCW radar can be lost because of the leakage. Another problem of FMCW radar is internal delay in the radar system. It leads to the decrease of the maximum detectable range. In this paper, a novel down-conversion technique which resolves these problems is proposed. Detailed theory and procedures to implement the proposed technique are explained. Then, performances of it are verified with the experiment results. The proposed technique can be implemented through frequency planning and digital signal processing without additional parts. The results show that the proposed technique lowers the noise floor about 7.0 dB in the near-distance region and 2.1 dB even in the far-distance region. Also, the results demonstrate the proposed technique recover the reduced maximum detectable range by compensating the internal delay.
Key facts. Cited by 1 paper in the map (data through 7 Oct 2026). First posted on arXiv 17 Jul 2018.
Builds on
No reference list yet.
Built on by
Citing papers per year: 2023: 1.
1 paper.
- 2023Stationary Point Losses for Robust Modelcited by 0
- 2023Stationary Point Losses for Robust Model19 Feb 2023